Low

PTH08080WAZT - 

Non Isolated POL DC/DC Converter, Adjustable, Surface Mount DIP, 10 W, 900 mV, 5.5 V, 2.25 A

TEXAS INSTRUMENTS PTH08080WAZT
TEXAS INSTRUMENTS PTH08080WAZT

Paveikslėlis yra tik kaip iliustracija. Žr. produkto aprašymą.

Gamintojo detalės nr.:
PTH08080WAZT
Užsakymo kodas:
1180200RL
Techninės specifikacijos:
(EN)
Peržiūrėti visus techninius dokumentus

Informacija apie produktą

:
10W
:
4.5V
:
15.24mm
:
12.7mm
:
5.5V
:
900mV
:
-
:
2.25A
:
Surface Mount DIP
:
UL
:
Adjustable
:
18V
:
8.76mm
Raskite panašius produktus Pasirinkite ir pakeiskite pirmiau nurodytas savybes, kad rastumėte panašius produktus.

Produktų apžvalga

The PTH08080WAZT is a 1-output 10W surface-mount non-isolated adjust Miniature Power Module delivers up to 2.25A of output current. The PTH08080W sources output current at a much higher efficiency than a TO-220 linear regulator IC, thereby eliminating the need for a heat sink. Its small size (0.5 x 0.6 in) and flexible operation creates value for a variety of applications. The input voltage range of the PTH08080W is from 4.5 to 18V, allowing operation from either a 5 or 12V input bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08080W can step down to voltages as low as 0.9V from a 5V input bus, with less than 1W of power dissipation. The output voltage can be adjusted to any voltage over the range, 0.9 to 5.5V, using a single external resistor. Operating features include an under-voltage lockout (UVLO), ON/OFF inhibit, overcurrent protection and over-temperature protection.
  • ON/OFF inhibit
  • Under-voltage lockout (UVLO)
  • Output overcurrent protection (non-latching, auto-reset)
  • Over-temperature protection
  • Highly integrated
  • Wide-output voltage adjust (0.9 to 5.5V)
  • Efficiencies up to 93%

Pritaikymas

Communications & Networking, Sensing & Instrumentation, Signal Processing

Susiję produktai

Palyginti pasirinktus