Pranešti man, kai bus sandėlyje
Kiekis | |
---|---|
1+ | 4,930 € |
10+ | 3,820 € |
25+ | 3,490 € |
50+ | 3,350 € |
100+ | 3,200 € |
250+ | 3,140 € |
500+ | 3,080 € |
Informacija apie produktą
Produktų apžvalga
The BQ24650RVAT is a synchronous switch-mode integrated Battery-charge Controller for solar power with maximum power point tracking provides input voltage regulation, which reduces charge current when input voltage falls below a programmed level. When the input is powered by a solar panel, the input regulation loop lowers the charge current so that the solar panel can provide maximum power output. The BQ24650 offers a constant-frequency synchronous PWM controller with high accuracy current and voltage regulation. The charge controller charges the battery in three phases such as pre-conditioning, constant current and constant voltage. Charge is terminated when the current reaches 1/10 of the fast charge rate. The pre-charge timer is fixed at 30 minutes. The charge controller automatically restarts the charge cycle if the battery voltage falls below an internal threshold and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage.
- Maximum Power Point Tracking (MPPT) capability by input voltage regulation
- Programmable MPPT setting
- Resistor programmable float voltage
- ±0.5% Charge-voltage regulation
- ±3% Charge-current regulation
- ±0.6% Input voltage regulation
- Internal loop compensation
- Internal digital soft start
- Input over-voltage protection
- Battery temperature sensing
- Battery absent detection
- Thermal shutdown
- Charge status outputs for led or host processor
- Charge enable on MPPSET pin
- Automatic sleep mode for low power consumption
- <lt/>15μA Off-state battery discharge current
- Green product and no Sb/Br
Pritaikymas
Power Management, Automotive
Techniniai duomenys
Lead Acid, LiFePO4, Li-Ion, Li-Pol
26V
VQFN
4Cells
125°C
-
28V
10A
16Pins
-40°C
Surface Mount
No SVHC (27-Jun-2018)
Teisinė ir aplinkosaugos informacija
Šalis, kurioje paskutinį kartą gamintojo atliktas stambus gamybos procesasKilmės šalis:Malaysia
Šalis, kurioje paskutinį kartą gamintojo atliktas stambus gamybos procesas
„RoHS“
„RoHS“
Gaminio atitikties sertifikatas