AD8001ARTZ-REEL7

AD8001ARTZ-REEL7 is a low power, high speed, current feedback amplifier designed to operate on ±5V supplies. The AD8001 features unique transimpedance linearization circuitry. This allows it to drive video loads with excellent differential gain and phase performance on only 50mW of power. The AD8001 is a current feedback amplifier and features gain flatness of 0.1dB to 100MHz while offering differential gain and phase error of 0.01% and 0.025°. This makes the AD8001 ideal for professional video electronics such as cameras and video switchers. Additionally, the AD8001’s low distortion and fast settling make it ideal for buffer high speed A-to-D converters. The AD8001 offers low power of 5.5mA max (VS = ±5 V) and can run on a single +12V power supply, while being capable of delivering over 70mA of load current. Applications include A-to-D drivers, video line drivers, professional cameras, video switchers, special effects, RF receivers.

• 380MHz typ -3dB small signal bandwidth at (G = +2, < 0.1dB peaking, RF = 768ohm)
• 1000V/µs typ slew rate at (G = +2, VO = 2V step)
• 10ns typ settling time to 0.1% at (G = –1, VO = 2V step)
• 2nV/√Hz typ input voltage noise at (f = 10KHz)
• 0.01% typ differential gain error at (NTSC, G = +2, RL = 150 ohm)
• Operating voltage range from ±3.0V to ±6.0V
• Quiescent current is 5mA typ at (TMIN–TMAX)
• Power supply rejection ratio is 75dB typ at (+VS = +4V to +6V, –VS = -5V)
• Temperature range from -40°C to +85°C
• 5-pin SOT-23 package

Pastabos

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party