AM-510-EUR KIT

The AM-510-EUR KIT from Beha-Amprobe is a digital multimeter kit. This tough meter is designed to be a reliable, feature rich and rugged solution for taking critical measurements in residential, HVAC, electrical and industrial settings at breakthrough affordability. We can rewire an electrical panel, install heated floors or new light fixtures, troubleshoot and repair home appliances, electrical sockets and automotive electrical problems with this easy to use multimeter. The AM-510-EUR has kick stand and probe holder to give third-hand need while taking measurements and noncontact voltage detection for quick go-no-go checks without need for an additional tool. It performs microamps, diode test, continuity, battery test, capacitance, frequency, non-contact voltage, duty cycle measurement functions. It complies with IEC/EN 61010-1 3rd edition, UL61010-1 2nd edition, CAN/CSA-C22.2 number 61010.1-0.92, IEC/EN 61010-2-030, IEC/EN 61010-2-31 for test leads & EMC IEC/EN 61326-1 standards.

• 1mV to 600V AC voltage measurement range and 1mV to 600V DC voltage measurement range
• 0.1μA to 10A AC current measurement range and 0.1μA to 10A DC current measurement range
• 0.1ohm to 40Mohm resistance measurement range and 10pF to 100µF capacitance measurement range
• Safety rated to CAT III 600V, pollution degree 2
• 3999 digits display, backlight
• Input resistance of 10Mohm
• Autoranging, manual ranging, data hold, relative reading
• Built-in flashlight to see wires in the darkness
• Dimension is 182mm x 90mm x 45mm and weight is 354g (including battery)

Pritaikymas

Test & Measurement

Turinys

AM-510-EUR digital multimeter, Pair of test leads, Users manual, Two 1.5V batteries, Carrying case.

Įspėjimai

Disconnect test leads before opening case to avoid shock, injury or damage to the meter.

Pastabos

Do not place the test probe in parallel with circuit when the test leads are connected to current terminals.