AM-520-EUR KIT

The AM-520-EUR KIT from Beha-Amprobe is a digital multimeter kit. This tough meters is designed to be a reliable, feature rich and rugged solution for taking critical measurements in residential, HVAC, electrical and industrial settings at breakthrough affordability. It performs microamps, diode test, continuity, capacitance, frequency, non-contact voltage measurement functions. The meter complies with IEC/EN 61010-1 3rd edition, UL61010-1 2nd edition, CAN/CSA-C22.2 number 61010.1-0.92, IEC/EN 61010-2-030, IEC/EN 61010-2-31 for test leads and EMC IEC/EN 61326-1 standards. The AM-520-EUR is designed for HVAC applications with key functions such as temperature, micro amps used for flame sensor troubleshooting, as well as and capacitance to check the motor start-up capacitors. It measures a complete range of electrical parameters and features a third hand probe holder and VoltTect non contact voltage detection.

• 1mV to 600V AC voltage measurement range and 0.1mV to 600V DC voltage measurement range
• 0.1μA to 10A AC current measurement range and 0.1μA to 10A DC current measurement range
• 0.1ohm to 40Mohm resistance measurement range and 10pF to 4000µF capacitance measurement range
• Safety rated to CAT III 600V, pollution degree 2
• 3999 digits display, backlight and bar graph
• Input resistance of 10Mohm
• Autoranging, manual ranging, data hold, relative reading and max/min hold
• Built-in flashlight to see wires in the darkness
• Dimension is 182mm x 90mm x 45mm and weight is 354g (including battery)

Pritaikymas

Test & Measurement

Turinys

AM-520-EUR multimeter, Two test leads, Temperature probe, 9 V battery, User manual, Strap, Carrying case.

Įspėjimai

Disconnect test leads before opening case to avoid shock, injury or damage to the meter.

Pastabos

Do not place the test probe in parallel with circuit when the test leads are connected to current terminals.