HCPL-4502-000E

The HCPL-4502-000E is a 1-channel 8-pin Diode-transistor Optocoupler uses an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. It is designed for high speed TTL/TTL applications. A standard 16mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6kΩ pull-up resistor. CTR for these devices is 19% minimum at IF=16mA. It is suitable for high voltage insulation, video signal isolation and line receivers.

• Open collector output
• 15kV/µs Minimum common mode transient immunity at VCM=1500V
• 630V Maximum working insulation voltage
• 0 to70°C Guaranteed performance from temperature range
• 1Mbps High speed

Pritaikymas

Motor Drive & Control, Signal Processing, Power Management

Įspėjimai

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.