MAX3656ETG+T

The MAX3656ETG+T is a 155Mbps to 2.5Gbps burst mode laser driver in 24 pin TQFN package. The laser driver accepts either positive referenced emitter coupled logic (PECL) or current mode logic (CML) data inputs and provides bias and modulation current for the laser diode. The device can switch laser diode from a completely dark (off) condition to a full (on) condition (with proper bias and modulation currents) in less than 2ns. The MAX3656 incorporates DC coupling between laser driver and laser diode and operates with a single supply voltage as low as +3V. A digital automatic power control (APC) loop is provided to maintain average optical power over full temperature range and lifetime. The APC loop is functional for a minimum burst on-time of 576ns and minimum burst off-time of 96ns with no limit on the maximum burst on- or off-time. It is used in passive optical network (PON) transmitters, fibre to the-home (FTTH) and fibre to the-business (FTTB) broadband access systems.

• Supply voltage range is 3V to 3.6V
• Operating temperature range from -40°C to +85°C
• Burst on-time of 576ns to infinity
• Infinite bias-current hold time between bursts
• Typical supply current of 40mA
• Programmable bias current from 1mA to 70mA
• Programmable modulation current from 10mA to 85mA
• Automatic average power control with failure monitor (no CAPC capacitor needed)
• APC loop initialization ≤3 bursts

Pritaikymas

Power Management

Pastabos

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party